NEW STAINLESS STEEL U SHAPE CONVEYOR-MADE IN THE USA-1 YEAR WARRANTY ON PARTS

Description

We can adjust or make specific changes to this Conveyor to fit your specific needs and applications. Contact us, we are here to help you.
NEW STAINLESS STEEL U SHAPE CONVEYOR WITH PLASTIC BELT
(SEE ATTACHED SCHEMATICS)
BRAND: DEPENDABLE EQUIPMENTS
MADE IN THE USA
1 YEAR WARRANTY ON PARTS
THIS U SHAPE CONVEYOR CONSIST OF THE FOLLOWING COMPONENTS:
2 CONVEYORS - 12 Ft long by 7" Wide
2 CORNER CONVEYORS - 3 Ft long by 7" Wide
1 CONVEYOR- 7 Ft long by 7" Wide (in between the 2 corners)
ADJUSTABLE GUIDE RAILS
AVAILABLE WITH THE LATEST TECHNOLOGY "DRUM MOTOR" INSTEAD OF DC GEAR MOTOR UPON REQUEST. PLEASE CONTACT US SO WE CAN ADD THE ADDITIONAL COST TO THE FINAL INVOICE OR IF YOU HAVE ANY QUESTIONS.
MOTOR SPECIFICATIONS:
BRAND-DAYTON
Technical Specs
Item
DC Gearmotor
Gearmotor Type
DC Gearmotor
Gearmotor Voltage
90VDC
Max. Torque
138.0 in.-lb.
Gearmotor Shaft Type
Single
Gearmotor Shaft Orientation
Parallel
Rear Shaft Encoder/Pulse Generator Mounting
Yes
Nameplate RPM
50
Gearmotor Enclosure
Totally Enclosed Nonventilated
Gearmotor Mounting Position
All Angle
Length Less Shaft
10-1/8"
Reversible Shaft Output
No
Overhung Load
150 lb.
Input HP
1/8
Gear Ratio
36:1
Full Load Amps
1.41
Thermal Protection
None
Max. Ambient Temp.
40 Degrees C
Gearmotor Rotation
CW/CCW
Motor Type
Permanent Magnet DC
Overall Length
11-5/8"
Bearings
Needle Roller and Thrust Balls on Case, Ball on Motor
Lubrication
Permanent Heavy Fluid Gear Oil
Brushes
Externally Replaceable
Gear Material
Hardened Steel
Gear Case
Die Cast Aluminum
Seals
On Input and Output Shaft
Housing Material
Die Cast Aluminum
Available with the latest technology "DRUM MOTOR" instead of DC Gear Motor UPON REQUEST. Please contact us, we need to add the additional cost to the final invoice.
A drum motor is a one component conveyor drive where the motor, gear drive and all moving parts are enclosed inside the drum. The motor and gears operate in a sealed oil bath ensuring proper lubrication and cooling. With no external motor, gear reducer, sprockets, chain or OSHA required chain guard, no external component maintenance is required.
SPEED CONTROL-BRAND DART
Technical Specs
Item
DC Speed Control
Enclosure
NEMA 4/12
Max. Amps
3
Voltage Output
0 to 90/180VDC
Speed Range
25:1
Rotation
Reversable
External Switches
CW/CCW
AC Input Voltage
120/240VAC
DC Speed Control
SCR
HP @ Lower Volts
1/50 to 1/3
HP @ Higher Volts
1/25 to 2/3
Linear Acceleration
Fixed 0.5 sec.
Current/Torque Limit
None
Speed Regulation
+/-1% of Base Speed
Shunt Wound Volts
100/200VDC
Accepts Tach Feedback
No
Dynamic Braking
No
IR Compensation
Adjustable
Follower Circuit
No
Mount Type
Compact Panel
Height
5.5"
Depth
3.5"
Width
3.81"
Operating Temp.
-10 Degrees to 45 Degrees C
Standards
cULus Recognized
Includes
Speed Potentiometer Knob and Dial Plate
CUSTOMIZATION AVAILABLE TO THE ENTIRE US TERRITORY
REFUND: We will refund any item returned within 14 days of our shipment, provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance.
LOCATION: HIALEAH, FLORIDA 33016
WE HAVE OUR OWN MANUFACTURING FACILITY
Freight shipments
must be throughly inspected
prior to accepting delivery. We are not responsible for any damages or shortages once a freight shipment has been signed for.
Any damages or missing items must be noted to the freight driver at the time of delivery.
PLEASE CONTACT US IF YOUR HAVE ANY QUESTIONS. WE ARE HERE TO HELP YOU.
PLEASE VISIT OUR EBAY STORE. WE HAVE PRODUCTS, TOOLS AND COMPONENTS FROM THE HVACR INDUSTRY ON STOCK AND READY FOR SHIPMENT.
THANK YOU